Upload Information For Your 3D Spark Setup

What You Will Upload

• A completed spreadsheet with your process chain and cost inputs

• If requested by your CS contact: a slicer project file with your printing parameters

• Optional: notes or special requirements

Where To Upload

Upload everything to your shared upload folder link provided by your CS contact.

Use these subfolders:

• 01_Spreadsheet

• 02_Slicer_Project

• 03_Example_Parts_Optional

• 04_Other

Step 1. Upload Your Process Chain And Costs Spreadsheet

1. Open the spreadsheet template in 01_Spreadsheet.

2. Fill in the required fields.

3. Upload the completed spreadsheet back into 01_Spreadsheet.

Next article: Upload Your Process Chain And Costs Spreadsheet

Step 2. Upload Your Slicer Project File Printing Parameters

Only do this if your CS contact asked for it.

1. Export or save your slicer project file that contains your production print settings.

2. Upload it into 02_Slicer_Project.

3. If you have multiple parameter sets, upload all relevant ones and name them clearly.

Next article: Upload Your Slicer Project File Printing Parameters

Step 3. Optional. Upload Example Parts If You Later Want To Report An Accuracy Issue

Only needed if you report that results are not accurate enough.

1. Upload 3 to 5 example CAD files that represent the issue.

2. Upload them into 03_Example_Parts_Optional.

3. If available, also upload the slicer project file used for those parts.

Before You Upload. Quick Checklist

• The spreadsheet is filled and saved in 01_Spreadsheet.

• Files are uploaded to the correct subfolder.

• File names are clear and unambiguous.

What Happens Next

• We set up your process chain and cost model in 3D Spark.

• We validate the setup internally.

• We let you know when your setup is ready for your validation and use.